import board
import pwmio
import time

motorIN1 = pwmio.PWMOut(board.GP8, frequency=1000, duty_cycle=0)
motorIN2 = pwmio.PWMOut(board.GP9, frequency=1000, duty_cycle=0) 


# DRIVE FORWARD
motorIN1.duty_cycle = 65535 # This is the maximum value
motorIN2.duty_cycle = 0     # This is the minimum value
time.sleep(1)

# DRIVE BACKWARD
motorIN1.duty_cycle = 0
motorIN2.duty_cycle = 65535
time.sleep(1)

# STOP
motorIN1.duty_cycle = 0
motorIN2.duty_cycle = 0 




import board
import pwmio
import time

# Initialize motor PWM pins
motorIN1 = pwmio.PWMOut(board.GP8, frequency=1000, duty_cycle=0)
motorIN2 = pwmio.PWMOut(board.GP9, frequency=1000, duty_cycle=0) 

def motor(power):
    # Make sure power is never greater than 100 or less than -100
    if power > 100:
        power = 100
    elif power < -100:
        power = -100

    # Convert 0-100 value, to 0 to 65535
    duty = abs(power) * 65535 // 100

    # Apply power to a motor pin, depending on if its greater or less than 0
    if power > 0:
        motorIN1.duty_cycle = duty
        motorIN2.duty_cycle = 0   
    elif power < 0:
        motorIN1.duty_cycle = 0
        motorIN2.duty_cycle = duty
    else:
        motorIN1.duty_cycle = 0
        motorIN2.duty_cycle = 0

# TESTS
motor(100) # FULL FORWARD
time.sleep(3)
motor(-100) # FULL REVERSE
time.sleep(3)

# Start at FULL REVERSE and slowly change from -100 to 100
for i in range(-100, 100):
    motor(i)
    print(i)
    time.sleep(0.1)











import board
import time
import motor

left_motor = motor.Motor(board.GP8, board.GP9)

# TESTS
left_motor.move(100)   # FULL FORWARD
time.sleep(2)
left_motor.move(-100)  # FULL REVERSE
time.sleep(2)
left_motor.move(0)

# Start at FULL REVERSE and slowly change from -100 to 100
for i in range(-100, 100):
    left_motor.move(i)
    print(i)
    time.sleep(0.1)



import pwmio

class Motor:
    def __init__(self, in1_pin, in2_pin, frequency=1000):
        # Set up PWM outputs on the specified pins
        self.in1 = pwmio.PWMOut(in1_pin, frequency=frequency, duty_cycle=0)
        self.in2 = pwmio.PWMOut(in2_pin, frequency=frequency, duty_cycle=0)

    def move(self, power):
        # Constrain power to -100 to 100
        if power > 100:
            power = 100
        elif power < -100:
            power = -100

        # Scale to duty cycle
        duty = abs(power) * 65535 // 100

        if power > 0:
            self.in1.duty_cycle = duty
            self.in2.duty_cycle = 0
        elif power < 0:
            self.in1.duty_cycle = 0
            self.in2.duty_cycle = duty
        else:
            self.in1.duty_cycle = 0
            self.in2.duty_cycle = 0