#include <base64.h>
#include "feetech.h"
#include "animation.h"

#define DEVICE_NAME "Little Sophia"
#define FIRMWARE_VERSION "0.0.1"

#define HEADER1 0xAA
#define HEADER2 0x55
#define MAX_PAYLOAD_SIZE 6000       // 10 KB
uint8_t payload[MAX_PAYLOAD_SIZE];  // Global or static

#define CMD_ID_REQUEST 0x01
#define CMD_FILE_LIST 0x02
#define CMD_LOAD_FILE 0x03
#define CMD_DELETE_FILE 0x04
#define CMD_SAVE_FILE 0x05
#define CMD_MESSAGE 0x06
#define CMD_SET_POSITION 0x07
#define CMD_PLAY_FILE 0x08
#define CMD_SCAN_CHANNEL 0x09
#define CMD_WRITE_DATA 0x10
#define CMD_START_POSITION_STREAM 0x14
#define POSITION_STREAM 0x15


// ESP32 S2 PINOUT
#define CH0_RX_PIN 13
#define CH0_TX_PIN 12

// #define RX_PIN 18  // RO
// #define TX_PIN 17  // DI
#define CH1_RX_PIN 11  // RO
#define CH1_TX_PIN 10  // DI
#define DE_PIN 7       // Driver Enable
#define RE_PIN 8       // Receiver Enable

Animation anim;
Animation sweep;
Animation stagger;

bool streamPositions = false;
unsigned long lastStreamPositions = 0;

Feetech* servos[2];

uint16_t flipBytes(uint16_t value) {
  return (value >> 8) | (value << 8);
}


uint8_t ids[NUM_CHANNELS] = { 10, 11, 12, 13, 14 };
uint16_t pos1[] = { 0, 0, 0, 0, 0 };
uint16_t pos2[] = { 1023, 1023, 1023, 1023, 1023 };

uint8_t idsSTS[NUM_CHANNELS] = { 15, 103 };
uint16_t pos1STS[] = { 0, 0 };
uint16_t pos2STS[] = { 1023, 1023 };

void setup() {
  Serial.begin(1000000);
  for (int i = 0; i < 5; i++) {
    Serial.println(i);
    delay(500);
  }

  servos[0] = new Feetech(Serial1, DE_PIN, RE_PIN, CH0_TX_PIN, CH0_RX_PIN);  // SCS
  servos[0]->setFeetechMode(Feetech::MODE_SCS);
  servos[1] = new Feetech(Serial2, DE_PIN, RE_PIN, CH1_TX_PIN, CH1_RX_PIN);  // STS
  servos[1]->setFeetechMode(Feetech::MODE_STS);

  // pinMode(RX_PIN, OUTPUT);
  // pinMode(TX_PIN, OUTPUT);
  // pinMode(DE_PIN, OUTPUT);
  // while (true){
  //   Serial.println(!digitalRead(RX_PIN));
  //   digitalWrite(RX_PIN, !digitalRead(RX_PIN));
  //   digitalWrite(TX_PIN, !digitalRead(TX_PIN));
  //   digitalWrite(DE_PIN, !digitalRead(DE_PIN));
  //   delay(2000);
  // }


  pos2[3] = flipBytes(pos2[3]);

  servos[0]->begin();
  servos[1]->begin();

  if (!FFat.begin(true)) {
    Serial.println("FFat mount failed");
    return;
  }
  // anim.loadFromFile("/bob.anim");
  // anim.printKeyframes();
  // playAnimation(anim);
  // ClearFiles();
  // // PrintFileList();
  // sweep.clear();
  // sweep.createSampleSweep(4);
  // sweep.saveToFile("/sweep.anim");
  // stagger.clear();
  // stagger.createStaggeredSweep(4);
  // stagger.saveToFile("/stagger.anim");
  // //delay(9999);
  // sweep.printKeyframes();


  // anim.clear();
  // if (!sweep.loadFromFile("/sweep.anim")) {
  //   Serial.println("Failed to load animation");
  //   return;
  // } else {
  //   Serial.println("Loaded sweep anim");
  // }

  // if (!stagger.loadFromFile("/stagger.anim")) {
  //   Serial.println("Failed to load animation");
  //   return;
  // } else {
  //   Serial.println("Loaded stagger anim");
  // }


  // Serial.println(anim.getFrame(0, 0));  // Should show saved value

  //SetID(12, 16);

  //Serial.println(servos[1]->setLockSTS(16, 0));
  // Serial.println("Enable torque");
  // Serial.println(servos[0]->enableTorque(13));
  // Serial.println(servos[1]->enableTorque(13));
  // delay(3000);
  // Serial.println("Disable torque");
  // Serial.println(servos[0]->disableTorque(13));
  // Serial.println(servos[1]->disableTorque(13));
  // delay(3000);
  // servos[0]->setMinAngleLimit(13, 100);
  // servos[1]->setMinAngleLimit(13, 900);
  // servos[0]->setMaxAngleLimit(13, 500);
  // servos[1]->setMaxAngleLimit(13, 3900);
}

void SetID(uint8_t oldID, uint8_t newID) {
  Serial.println("Setting Lock to 0");
  Serial.println(servos[0]->setLock(oldID, 0));
  delay(1000);
  Serial.print("Changing ID ");
  Serial.print(oldID);
  Serial.print(" to ");
  Serial.println(newID);
  Serial.println(servos[0]->setID(oldID, newID));
  delay(1000);
  Serial.println("Setting Lock to 1");
  Serial.println(servos[0]->setLock(newID, 1));
  delay(1000);
}

void HandleSerialRequests() {
  if (Serial.available() >= 6) {  // 2 headers + 1 command + 2 length + 1 checksum minimum
    if (Serial.read() == HEADER1 && Serial.read() == HEADER2) {
      uint8_t command = Serial.read();
      uint16_t length = (Serial.read() << 8) | Serial.read();

      if (length > MAX_PAYLOAD_SIZE) {
        Serial.println("Payload too large");
        while (Serial.available()) Serial.read();  // flush junk
        return;
      }

      unsigned long start = millis();
      while (Serial.available() < length + 1) {
        if (millis() - start > 1000) {  // 1 second timeout
          Serial.println("Serial timeout");
          return;
        }
      }


      uint8_t checksum = command ^ (length >> 8) ^ (length & 0xFF);

      for (uint16_t i = 0; i < length; i++) {
        payload[i] = Serial.read();
        checksum ^= payload[i];
      }

      uint8_t receivedChecksum = Serial.read();

      if (checksum == receivedChecksum) {
        handleCommand(command, payload, length);
      } else {
        Serial.println("Checksum mismatch");
      }
    }
  }
}
void sendMessage(const String& payload, uint8_t command = CMD_MESSAGE) {
  uint16_t length = payload.length();

  uint8_t checksum = CMD_MESSAGE ^ (length >> 8) ^ (length & 0xFF);
  for (int i = 0; i < length; i++) {
    checksum ^= payload[i];
  }

  Serial.write(HEADER1);
  Serial.write(HEADER2);
  Serial.write(command);
  Serial.write((length >> 8) & 0xFF);
  Serial.write(length & 0xFF);
  Serial.write((const uint8_t*)payload.c_str(), length);
  Serial.write(checksum);
}

void sendMessage(const uint8_t* payload, uint16_t length, uint8_t command = CMD_MESSAGE) {
  uint8_t checksum = command ^ (length >> 8) ^ (length & 0xFF);
  for (uint16_t i = 0; i < length; i++) {
    checksum ^= payload[i];
  }

  Serial.write(HEADER1);
  Serial.write(HEADER2);
  Serial.write(command);
  Serial.write((length >> 8) & 0xFF);
  Serial.write(length & 0xFF);
  Serial.write(payload, length);
  Serial.write(checksum);
}

void handleCommand(uint8_t command, const uint8_t* payload, uint16_t length) {
  switch (command) {
    case CMD_ID_REQUEST:  // CMD_ID_REQUEST
      handleIdRequest();
      break;

    case CMD_FILE_LIST:  //
      handleFileList();
      break;

    case CMD_LOAD_FILE:  //
      handleLoadFile(payload, length);
      break;

    case CMD_DELETE_FILE:  //
      handleDeleteFile(payload, length);
      break;

    case CMD_SAVE_FILE:
      handleSaveFile(payload, length);
      break;

    case CMD_SET_POSITION:
      handleSetPosition(payload, length);
      break;

    case CMD_PLAY_FILE:
      handlePlayAnimation(payload, length);
      break;

    case CMD_SCAN_CHANNEL:
      handleScanChannel(payload, length);
      break;

    case CMD_WRITE_DATA:
      handleDataWrite(payload, length);
      break;

    case CMD_START_POSITION_STREAM:
      startPositionStream(payload, length);
      break;

    default:
      Serial.print("Unknown command: ");
      Serial.println(command, HEX);
      break;
  }
}


void startPositionStream(const uint8_t* payload, uint16_t length) {
  bool start = payload[0] != 0;
  servos[0]->disableTorque(10);
  servos[0]->waitOnData1Byte(10);
  servos[0]->disableTorque(11);
  servos[0]->waitOnData1Byte(10);
  servos[0]->disableTorque(12);
  servos[0]->waitOnData1Byte(10);
  servos[0]->disableTorque(13);
  servos[0]->waitOnData1Byte(10);
  servos[0]->disableTorque(14);
  servos[0]->waitOnData1Byte(10);
  streamPositions = start;
}


void handleDataWrite(const uint8_t* payload, uint16_t length) {
  uint8_t channel = payload[0];
  uint8_t id = payload[1];
  uint8_t writeByte = payload[2];

  if (payload[4] == 1) {
    servos[channel]->write1Byte(id, writeByte, payload[4]);
    uint8_t response = servos[channel]->waitOnData1Byte(10);
    sendMessage(&response, 1, CMD_WRITE_DATA);
  } else {
    servos[channel]->write2Bytes(id, writeByte, payload[4] | (payload[5] << 8));
    uint16_t response = servos[channel]->waitOnData2Bytes(10);
    uint8_t buffer[2];
    buffer[0] = (response >> 8) & 0xFF;  // high byte
    buffer[1] = response & 0xFF;         // low byte
    sendMessage(buffer, 2, CMD_WRITE_DATA);
  }
}

void handleIdRequest() {
  String payload = String(DEVICE_NAME) + "|" + FIRMWARE_VERSION;
  uint16_t length = payload.length();

  uint8_t checksum = CMD_ID_REQUEST ^ (length >> 8) ^ (length & 0xFF);
  for (int i = 0; i < length; i++) {
    checksum ^= payload[i];
  }

  Serial.write(HEADER1);
  Serial.write(HEADER2);
  Serial.write(CMD_ID_REQUEST);
  Serial.write((length >> 8) & 0xFF);
  Serial.write(length & 0xFF);
  Serial.write((const uint8_t*)payload.c_str(), length);
  Serial.write(checksum);
}

void handleFileList() {
  File root = FFat.open("/");
  if (!root || !root.isDirectory()) {
    sendFileListResponse("");  // empty payload
    return;
  }

  String payload = "";
  File file = root.openNextFile();

  while (file) {
    if (!file.isDirectory()) {
      payload += String(file.name()) + "\n";
    }
    file = root.openNextFile();
  }

  sendFileListResponse(payload);
}

void sendFileListResponse(const String& payloadStr) {
  uint16_t length = payloadStr.length();
  if (length > MAX_PAYLOAD_SIZE) {
    Serial.println("File list too large");
    return;
  }

  uint8_t checksum = CMD_FILE_LIST ^ (length >> 8) ^ (length & 0xFF);
  for (uint16_t i = 0; i < length; i++) {
    checksum ^= payloadStr[i];
  }

  Serial.write(HEADER1);
  Serial.write(HEADER2);
  Serial.write(CMD_FILE_LIST);
  Serial.write((length >> 8) & 0xFF);
  Serial.write(length & 0xFF);
  Serial.write((const uint8_t*)payloadStr.c_str(), length);
  Serial.write(checksum);
}

void handleLoadFile(const uint8_t* payload, uint16_t length) {
  if (length == 0 || length >= 128) {
    Serial.println("Invalid filename");
    return;
  }

  char filename[128];
  memcpy(filename, payload, length);
  filename[length] = '\0';

  File file = FFat.open(filename, "r");
  if (!file || !file.available()) {
    Serial.println("File not found or empty");
    return;
  }

  size_t fileSize = file.size();
  if (fileSize > 65535) {
    Serial.println("File too large for single transfer");
    file.close();
    return;
  }

  uint8_t* buffer = (uint8_t*)malloc(fileSize);
  if (!buffer) {
    Serial.println("Memory allocation failed");
    file.close();
    return;
  }

  size_t bytesRead = file.read(buffer, fileSize);
  file.close();

  if (bytesRead != fileSize) {
    Serial.println("File read error");
    free(buffer);
    return;
  }

  // 🔹 Compute checksum
  uint8_t checksum = CMD_LOAD_FILE ^ (fileSize >> 8) ^ (fileSize & 0xFF);
  for (size_t i = 0; i < fileSize; i++) {
    checksum ^= buffer[i];
  }

  // 🔹 Send packet
  Serial.write(HEADER1);
  Serial.write(HEADER2);
  Serial.write(CMD_LOAD_FILE);
  Serial.write((fileSize >> 8) & 0xFF);
  Serial.write(fileSize & 0xFF);
  Serial.write(buffer, fileSize);
  Serial.write(checksum);

  free(buffer);
  Serial.println("File sent in one go");
}

void handleDeleteFile(const uint8_t* payload, uint16_t length) {
  sendMessage("Deleting FILE");
  if (length < 1) {
    Serial.println("Payload too short for filename length");
    sendMessage("Payload too short for filename length");
    return;
  }

  // 🔹 Parse filename
  uint16_t filenameLength = payload[0] | (payload[1] << 8);
  if (length < 2 + filenameLength) {
    Serial.println("Payload too short for filename");
    sendMessage("Payload too short for filename");
    return;
  }


  char filename[filenameLength + 1];


  memcpy(filename, payload + 2, filenameLength);
  filename[filenameLength] = '\0';

  deleteFile(FFat, ("/" + String(filename)).c_str());


  sendMessage(("File Deleted: " + String(filename)).c_str(), CMD_DELETE_FILE);
}


void handlePlayAnimation(const uint8_t* payload, uint16_t length) {
  sendMessage("Playing FILE");
  if (length < 1) {
    Serial.println("Payload too short for filename length");
    sendMessage("Payload too short for filename length");
    return;
  }

  // 🔹 Parse filename
  uint16_t filenameLength = payload[0] | (payload[1] << 8);
  if (length < 2 + filenameLength) {
    Serial.println("Payload too short for filename");
    sendMessage("Payload too short for filename");
    return;
  }


  char filename[filenameLength + 1];


  memcpy(filename, payload + 2, filenameLength);
  filename[filenameLength] = '\0';

  //deleteFile(FFat, ("/" + String(filename)).c_str());
  anim.clear();
  anim.loadFromFile(("/" + String(filename)).c_str());
  playAnimation(anim);

  sendMessage("File Played", CMD_PLAY_FILE);
}

void handleSaveFile(const uint8_t* payload, uint16_t length) {
  bool valid = parseAnimationPayload(payload, length, anim);

  if (valid) {
    //Serial.println("Animation parsed successfully!");
    //anim.printKeyframes();
  } else {
    //Serial.println("Failed to parse animation.");
    length = 1;         // Override length to 1 for fallback response
    payload = nullptr;  // We'll send a single 0x00 instead
  }

  if (length > MAX_PAYLOAD_SIZE) {
    Serial.println("File list too large");
    return;
  }

  // Calculate checksum
  uint8_t checksum = CMD_SAVE_FILE ^ (length >> 8) ^ (length & 0xFF);
  if (valid) {
    for (uint16_t i = 0; i < length; i++) {
      checksum ^= payload[i];
    }
  } else {
    checksum ^= 0x00;
  }

  // Send response
  Serial.write(HEADER1);
  Serial.write(HEADER2);
  Serial.write(CMD_SAVE_FILE);
  Serial.write((length >> 8) & 0xFF);
  Serial.write(length & 0xFF);

  if (valid) {
    for (uint16_t i = 0; i < length; i++) {
      Serial.write(payload[i]);
    }
  } else {
    Serial.write(0x00);
  }

  Serial.write(checksum);
}



bool parseAnimationPayload(const uint8_t* payload, uint16_t length, Animation& animation) {
  sendMessage("SAVING FILE");
  if (length < 1) {
    Serial.println("Payload too short for filename length");
    return false;
  }

  // 🔹 Parse filename
  uint16_t filenameLength = payload[0] | (payload[1] << 8);
  if (length < 2 + filenameLength + 18) {
    Serial.println("Payload too short for filename and header");
    return false;
  }

  char filename[filenameLength + 1];


  memcpy(filename, payload + 2, filenameLength);
  filename[filenameLength] = '\0';


  const uint8_t* ptr = payload + 2 + filenameLength;

  String msg = "SAVING FILE: ";
  msg += filename;
  sendMessage(msg);
  // 🔹 Parse header
  memcpy(animation.header.magic, ptr, 4);
  if (strncmp(animation.header.magic, "ANIM", 4) != 0) {
    Serial.println("Invalid magic header");

    sendMessage("invalid magic header");
    return false;
  }

  animation.header.frameCount = (ptr[4] << 8) | ptr[5];
  animation.header.version = ptr[6];
  animation.header.frameRate = ptr[7];
  memcpy(animation.header.reserved, ptr + 8, 8);

  uint16_t keyframeCount = ptr[16] | (ptr[17] << 8);
  ptr += 18;

  if (length < (ptr - payload) + keyframeCount * 5) {
    Serial.println("Payload too short for keyframes");
    sendMessage("Payload too short");
    return false;
  }

  // 🔹 Parse keyframes
  animation.clear();
  for (uint16_t i = 0; i < keyframeCount; i++) {
    uint8_t motorId = ptr[0];
    uint16_t frame = ptr[1] | (ptr[2] << 8);
    uint16_t position = ptr[3] | (ptr[4] << 8);
    animation.addKeyframe(motorId, frame, position);
    ptr += 5;
  }

  // 🔹 Save using received filename
  animation.saveToFile(("/" + String(filename)).c_str());

  sendMessage("SAVED");
  return true;
}


void handleSetPosition(const uint8_t* payload, uint16_t length) {
  if (length % 3 != 0) {
    Serial.println("Invalid sync packet length");
    return;
  }

  uint8_t count = 0;
  for (int i = 0; i < length; i += 3) {
    uint8_t motorId = payload[i];
    uint16_t position = (payload[i + 2] << 8) | payload[i + 1];
    pos1[count] = position;
    count++;
    // Apply position to motorId

    //servos.sendWritePos(ids[motorId], position);
  }
  servos[0]->syncWritePos(ids, pos1, NUM_CHANNELS);
}


// Scans 0-254 and responds with the channel and ID as each successful ping is received
// Signals end by responding with channel and 255
void handleScanChannel(const uint8_t* payload, uint16_t length) {
  if (length != 1) {
    sendMessage("Length of scanChannel Request Wrong");
    return;
  }


  for (int i = 0; i < 254; i++) {
    servos[payload[0]]->sendPing(i);
    uint8_t val = servos[payload[0]]->waitOnData1Byte(10);

    if (val != 0) {
      uint8_t response[44];      // Adjusted size to fit all values
      response[0] = payload[0];  // channel
      response[1] = i;           // responding address

      uint16_t model = servos[payload[0]]->getModel(i);
      uint16_t minAngleLimit = servos[payload[0]]->getMinAngleLimit(i);
      uint16_t maxAngleLimit = servos[payload[0]]->getMaxAngleLimit(i);
      uint16_t position = servos[payload[0]]->getPosition(i);
      uint8_t CWDeadZone = servos[payload[0]]->getCWDeadZone(i);
      uint8_t CCWDeadZone = servos[payload[0]]->getCCWDeadZone(i);
      uint16_t offset = servos[payload[0]]->getOffset(i);
      uint8_t mode = servos[payload[0]]->getMode(i);
      uint8_t torqueEnable = servos[payload[0]]->getTorqueEnable(i);
      uint8_t acceleration = servos[payload[0]]->getAcceleration(i);
      uint16_t goalPosition = servos[payload[0]]->getGoalPosition(i);
      uint16_t goalTime = servos[payload[0]]->getGoalTime(i);
      uint16_t goalSpeed = servos[payload[0]]->getGoalSpeed(i);
      uint8_t lock = servos[payload[0]]->getLock(i);
      int16_t speed = servos[payload[0]]->getSpeed(i);
      uint16_t load = servos[payload[0]]->getLoad(i);
      uint8_t temperature = servos[payload[0]]->getTemperature(i);
      uint8_t moving = servos[payload[0]]->getMoving(i);
      uint8_t current = servos[payload[0]]->getCurrent(i);
      uint8_t voltage = servos[payload[0]]->getVoltage(i);

      // Pack values into response
      response[2] = (model >> 8) & 0xFF;
      response[3] = model & 0xFF;

      response[4] = (minAngleLimit >> 8) & 0xFF;
      response[5] = minAngleLimit & 0xFF;

      response[6] = (maxAngleLimit >> 8) & 0xFF;
      response[7] = maxAngleLimit & 0xFF;

      response[8] = (position >> 8) & 0xFF;
      response[9] = position & 0xFF;

      response[10] = CWDeadZone;
      response[11] = CCWDeadZone;

      response[12] = (offset >> 8) & 0xFF;
      response[13] = offset & 0xFF;

      response[14] = mode;
      response[15] = torqueEnable;
      response[16] = acceleration;

      response[17] = (goalPosition >> 8) & 0xFF;
      response[18] = goalPosition & 0xFF;

      response[19] = (goalTime >> 8) & 0xFF;
      response[20] = goalTime & 0xFF;

      response[21] = (goalSpeed >> 8) & 0xFF;
      response[22] = goalSpeed & 0xFF;

      response[23] = lock;

      response[24] = (speed >> 8) & 0xFF;
      response[25] = speed & 0xFF;

      response[26] = (load >> 8) & 0xFF;
      response[27] = load & 0xFF;

      response[28] = temperature;
      response[29] = moving;
      response[30] = (current >> 8) & 0xFF;
      response[31] = current & 0xFF;

      response[32] = voltage;


      // You can continue adding more fields here if needed...

      sendMessage(response, 33, CMD_SCAN_CHANNEL);  // updated length
    }
  }
  uint8_t r[2];
  r[0] = payload[0];  // channel
  r[1] = 255;         // responding address

  sendMessage(r, 2, CMD_SCAN_CHANNEL);


  // std::vector<uint8_t> successfulAddresses;
  // servos[payload[0]]->pingAll(successfulAddresses);
  // std::vector<uint8_t> response;
  // response.push_back(payload[0]);                  // channel
  // response.push_back(successfulAddresses.size());  // count

  // for (uint8_t address : successfulAddresses) {
  //   response.push_back(address);
  // }

  // sendMessage(response.data(), response.size(), CMD_SCAN_CHANNEL);
}



bool flip = false;
unsigned long lastSend = 0;
void loop() {

  // for (int i = 0; i < 1023; i++) {
  //   servos[0]->sendWritePos(10, i);
  //   Serial.println(servos[0]->waitOnData1Byte(10));
  //   delay(20);
  // }


  HandleSerialRequests();
  // for (int i = 0; i < 500; i+=32) {
  //   // Serial.print("WRITE: ");
  //   // Serial.print(i);
  //   // Serial.print(" ");
  //   // Serial.println(servos[1]->setMinAngleLimit(16, i));

  //   Serial.print("READ: ");
  //   Serial.println(servos[1]->getMinAngleLimit(16));
  //   delay(2000);
  // }
  // servos[0]->sendWritePos(13, 0);
  // servos[1]->sendWritePos(13, 0);

  // Serial.print(servos[0]->getMinAngleLimit(13));
  // Serial.print("\t");
  // Serial.print(servos[0]->getMaxAngleLimit(13));
  // Serial.print("\t");
  // Serial.print(servos[1]->getMinAngleLimit(13));
  // Serial.print("\t");
  // Serial.println(servos[1]->getMaxAngleLimit(13));
  // delay(1000);

  // //
  // for (int i = 0; i < 4095; i+=16){
  //   Serial.println(i);
  //   servos[0]->sendWritePos(13, i);
  //   servos[1]->sendWritePos(13, i);
  //   delay(20);
  // }
  // delay(1000);
  // for (int i = 4095; i > 0; i-=16){
  //   Serial.println(i);
  //   servos[0]->sendWritePos(13, i);
  //   servos[1]->sendWritePos(13, i);
  //   delay(20);
  // }
  // delay(1000);
  // delay(1000);
  //   for (int i = 0; i< 100; i++){
  //   Serial.println(servos[1]->getGoalSpeed(13));
  //   delay(10);
  //   }
  // servos[0]->sendWritePos(13, 0);
  //   for (int i = 0; i< 100; i++){
  //   Serial.println(servos[1]->getGoalSpeed(13));
  //   delay(10);
  //   }
  if (millis() - lastSend > 2000) {

    //sendMessageFromESP32(String(millis()));
    //handleIdRequest();
    //PrintFileList();
    lastSend = millis();
  }

  if (streamPositions) {
    if (millis() - lastStreamPositions > 50) {
      lastStreamPositions = millis();
      SendMotorPositions();
    }
  }
}

void SendMotorPositions() {

  uint16_t p0 = servos[0]->getPosition(10);
  uint16_t p1 = servos[0]->getPosition(11);
  uint16_t p2 = servos[0]->getPosition(12);
  uint16_t p3 = servos[0]->getPosition(13);
  uint16_t p4 = servos[0]->getPosition(14);

  uint8_t payload[10];

  payload[0] = p0 >> 8;
  payload[1] = p0 & 0xFF;
  payload[2] = p1 >> 8;
  payload[3] = p1 & 0xFF;
  payload[4] = p2 >> 8;
  payload[5] = p2 & 0xFF;
  payload[6] = p3 >> 8;
  payload[7] = p3 & 0xFF;
  payload[8] = p4 >> 8;
  payload[9] = p4 & 0xFF;

  sendMessage(payload, 10, POSITION_STREAM);
}

void PrintFileList() {
  File root = FFat.open("/");
  if (!root || !root.isDirectory()) {
    Serial.println("Failed to open FFat root directory");
    return;
  }

  Serial.println("Files in FFat:");

  File file = root.openNextFile();
  while (file) {
    Serial.print("  ");
    Serial.print(file.name());
    Serial.print("  |  Size: ");
    Serial.println(file.size());
    file = root.openNextFile();
  }

  Serial.println("End of file list.");
}

void ClearFiles() {
  File root = FFat.open("/");
  if (!root || !root.isDirectory()) {
    Serial.println("Failed to open FFat root directory");
    return;
  }

  Serial.println("Files in FFat:");

  File file = root.openNextFile();
  while (file) {
    String filename = "/" + String(file.name());  // Add leading slash
    Serial.print("  Deleting: ");
    Serial.println(filename);
    file.close();                        // Close before deleting
    deleteFile(FFat, filename.c_str());  // Use corrected path
    file = root.openNextFile();
  }

  Serial.println("FFat cleanup complete.");
}



void deleteFile(fs::FS& fs, const char* path) {
  Serial.printf("Deleting file: %s\r\n", path);
  if (fs.remove(path)) {
    Serial.println("- file deleted");
  } else {
    Serial.println("- delete failed");
  }
}

void playAnimation(Animation& anim) {
  uint16_t positions[NUM_CHANNELS];
  const uint16_t frameCount = 400;  //anim.getFrameCount();
  const uint32_t frameDelay = 1000 / FRAMES_PER_SECOND;
  uint32_t nextFrameTime = millis();
  Serial.print("Frame Count: ");
  Serial.println(frameCount);

  // Organize keyframes per motor
  std::vector<Keyframe> motorKeyframes[NUM_CHANNELS];
  for (const auto& kf : anim.getKeyframes()) {
    if (kf.motorId < NUM_CHANNELS) {
      motorKeyframes[kf.motorId].push_back(kf);
    }
  }

  // Sort keyframes per motor by frame
  for (int ch = 0; ch < NUM_CHANNELS; ch++) {
    std::sort(motorKeyframes[ch].begin(), motorKeyframes[ch].end(),
              [](const Keyframe& a, const Keyframe& b) {
                return a.frame < b.frame;
              });
  }

  for (uint16_t frame = 0; frame < frameCount; frame++) {
    while (millis() < nextFrameTime) {
      delay(1);
    }

    for (int ch = 0; ch < NUM_CHANNELS; ch++) {
      const auto& kfs = motorKeyframes[ch];
      uint16_t value = 512;  // default position

      // Find surrounding keyframes
      Keyframe prev = { ch, 0, 512 }, next = { ch, frameCount, 512 };
      for (size_t i = 0; i < kfs.size(); i++) {
        if (kfs[i].frame <= frame) {
          prev = kfs[i];
        }
        if (kfs[i].frame > frame) {
          next = kfs[i];
          break;
        }
      }

      // Interpolate
      if (prev.frame == next.frame) {
        value = prev.position;
      } else {
        float t = float(frame - prev.frame) / (next.frame - prev.frame);
        value = prev.position + t * (next.position - prev.position);
      }

      positions[ch] = value;
    }
    Serial.println(positions[0]);
    servos[0]->syncWritePos(ids, positions, NUM_CHANNELS);
    nextFrameTime += frameDelay;
  }
}



void playAnimationOLD(Animation& anim) {
  uint16_t positions[NUM_CHANNELS];
  const uint16_t frameCount = anim.getFrameCount();
  const uint32_t frameDelay = 1000 / FRAMES_PER_SECOND;  // 20 ms

  uint32_t nextFrameTime = millis();

  for (uint16_t frame = 0; frame < frameCount; frame++) {
    // Wait until it's time for the next frame
    while (millis() < nextFrameTime) {
      // Optional: yield or do background tasks here
      delay(1);
    }

    // Send frame to servos
    if (anim.getFramePositions(frame, positions)) {
      servos[0]->syncWritePos(ids, positions, NUM_CHANNELS);
    }

    // Schedule next frame
    nextFrameTime += frameDelay;
  }
}

void playLayeredAnimation(Animation& base, Animation& overlay) {
  uint16_t basePositions[NUM_CHANNELS];
  uint16_t overlayPositions[NUM_CHANNELS];
  uint16_t finalPositions[NUM_CHANNELS];

  const uint16_t frameCount = base.getFrameCount();
  const uint32_t frameDelay = 1000 / FRAMES_PER_SECOND;
  uint32_t nextFrameTime = millis();

  for (uint16_t frame = 0; frame < frameCount; frame++) {
    while (millis() < nextFrameTime) delay(1);

    base.getFramePositions(frame, basePositions);
    overlay.getFramePositions(frame, overlayPositions);

    for (uint8_t ch = 0; ch < NUM_CHANNELS; ch++) {
      finalPositions[ch] = (basePositions[ch] + overlayPositions[ch]) / 2;
    }

    servos[0]->syncWritePos(ids, finalPositions, NUM_CHANNELS);
    nextFrameTime += frameDelay;
  }
}


void SCSPingAll() {
  std::vector<uint8_t> successfulAddresses;
  servos[0]->pingAll(successfulAddresses);

  // Now successfulAddresses contains all successful pings
  Serial.println("Successful Addresses:");
  for (uint8_t address : successfulAddresses) {
    Serial.print(address);
    Serial.print(" ");
  }
  Serial.println();
}

void STSPingAll() {
  std::vector<uint8_t> successfulAddresses;
  servos[1]->pingAll(successfulAddresses);

  // Now successfulAddresses contains all successful pings
  Serial.println("Successful Addresses:");
  for (uint8_t address : successfulAddresses) {
    Serial.print(address);
    Serial.print(" ");
  }
  Serial.println();
}